Description

NEW 2 STAGE 9Kw/18Kw RV TANKLESS HOT WATER UNIT

Unlike Other Instant Hot Water Units on The Market there is No need To Adjust the Water Flow to Continually have hot water at 50 oC

Having 2 Stage 9kw & 18Kw Burners Allows for Twice the Water Flow Compared to Other Water Heaters

This New Model Pinnacle Tankless Hot Water Unit Is the Best Tankless Hot-Water Unit Available in The Market:

It has 2 Stages 1 At 35,000 Btu (9Kw) and the other Stage at 60,000 to 65,000Btu (18Kw) This Allows for Quicker Heating Times (With the water heater starting on 18Kw) which allows for Less Water Wastage due to heating times, Compared to Other Tankless water Heaters on The Market That Only Have 9Kw of heating.

Having a large 18kw heating capacity also allows for a much higher water flow up to 12 LPM rate compared to other water heaters with a low 9kw (35,000Btu) Heating Capacity.

The Pinnacle On Demand Water Heaters provide an endless supply of hot water at a controlled temperature.
as set by the RV/Caravan owner.
The On-Demand feature saves energy by only engage the burners when water is needed…be it for a hot shower, clean dishes.
or for hosing off after a day at the beach.
Sized to fit into existing standard 20 Liter water heater side-wall cutouts such as Suburban & Swift etc, the unit comes ready for set-up with an included.
wall mount digital control centre.

Designed With a Wide Array of Safety & Protection Features

•  Flame Out Protection is a safety feature that will cut gas supply immediately due to low propane pressure or burner malfunction.

• Scald Protection is managed through an internal high temperature kill switch to protect against a thermostat malfunction.

• A child lock prevents outlet temperatures in excess of 65° C.

•  Automatic Fan Monitoring, cuts gas supply should the air flow or combustion air supply be interrupted.

• Active Freeze Protection from unexpected low temperatures when power and propane are available.

• Pressure Release Safety Valve

• Voltage Protection shuts down the unit if low/high or overcurrent voltage is detected.

• Worry-Free two-year limited warranty
  
  TECHNICAL SPECIFICATIONS
  Max. / Nominal Heat Input 60,000 BTU 
  Minimum Heat Input 8,000 BTU
  Max. Inlet Gas Pressure 3.49 kPa (14" wc)
  Min. Inlet Gas Pressure 2.62 kPa (10.5" wc)
  Rated Gas Inlet Pressure 2.74 kPa (11" wc)
  Electrical Supply 12VDC
  Total Input Current <10A
  Ignition Method Automatic Ignition
  Min. Water Flow Rate 0.7 GPM
  Gas Inlet Connection 3/8" Male Flare
  Water Inlet/Outlet Connections 1/2" Male NPT
  Dimensions (Casing, HxWxD) 331mm x 326mmx330mm
  Max Outlet Temperature 55°C
  Weight (unit only) 8 kg
  Weight (with door) 8.5 kg
  Door Colour Options- Black, White